Firearms Maintenance Tools
|
Screwdriver
Bits Kit (SBK) Configured by Borka for general use on firearms and bicycles Weight: 8 ounces This kit includes: 1. Compact 1/4" hex (F) low profile ratchet drive handle 2. Custom Autolock (quick release lock) 2" long bit holder* 3. 1/4" hex drive (M) to 1/4" square drive (M) adapter 4. S2 steel 1" long chrome plated screwdriver bits (total of 29): Hex, Inch: 3/32, 7/64, 1/8, 9/64, 5/32, 3/16 Hex, Metric: 2, 2.5, 3, 4, 5, 6 Torx: T-10, T-15, T-20, T-25, T-27, T-30 Slotted: 1/8, 5/32, 3/16, 7/32, 1/4, 5/16 Phillips: #1, #2 Other bits**: spare T-10, T-15, T-20 5. Packaged in 4 mil thick reclosable poly bag *Can be used with included ratchet or in the power drill chuck. **These bits are located in slots labeled SPB#1, SPB#2 and SPB#3. |
| "Off-the-shelf" SBK configurations | |||
| Kit code | Description | In stock | Price |
| SBK | Standard SBK configuration as shown above | Yes | $40.00 |
| SBKx2 | Two (2) of standard SBKs, with quantity discount | Yes | $70.00 |
SBK typically serves as an essential component
of DIY tool kit and includes 29 bits and 1/4" square drive adapter,
optimized for work on firearms, bicycles, motorcycles,
boats, other equipment. Also included are low profile
compact ratchet drive handle and Borka Tools Autolock (bit holder
with quick release locking chuck). Our Autolock
incorporates a standard 1/4" hex shank and can be used
with included ratchet handle, other screwdrivers with
standard 1/4" hex socket or in the chuck of the power drill.
We do not ship to destinations outside the U.S. zip codes areas. If you reside in any country other than the U.S., do not use "Add to Cart" buttons below. See FAQ, #15.
Flat rate shipping charge is $12.00 for a single item, $15.00 for two items and $18.00 for three items sent in the same package to the same address. If the total number of items you want to purchase is more than three (3), contact us by e-mail for a quote.
Accessories, shown below, are supplied only with Borka kits and are not available for sale as separate items.
|
Custom made 3/16" ball-end hex 4" long bit Designed by Borka Tools and custom made per our specifications Also known as Universal AICS bit, it works for both Generation 1 and Generation 2 Accuracy International Chassis Systems, and for other chassis designs, which use action screws with 3/16" head hex sockets. It is made from S2 steel, hardened to HRc 58-60 and provides access to the action screws with stock skins attached. |
|
Custom made 5/32" ball-end hex 4" long bit Designed by Borka Tools and custom made per our specifications This long bit is similar in design to 3/16" ball-end hex 4" long bit, except that it is sized for action screws with 5/32" hex sockets. Bit is made from S2 steel, hardened to HRc 58-60 and provides easy access to the action screws if longer tool reach is required. It also works well for Ruger 10/22 V-block 10-32 clamp screws. |
|
Emergency Cleaning Rod
(ECR)
Configured by Borka from parts made by Pro-Shot Products ECR includes seven (7) coated rod sections with the standard 8-32 threads, each providing 4.5" of usable rod length, for 31.5" of maximum rod length when fully assembled. Rod sections are machined from 416 stainless steel, which is mechanically strong, but is softer than the typical barrel steel, and have 0.203" O.D. ECR also includes 0.5" long rod end protector, made from brass, having the same 0.203" O.D., and 0.75" diameter ball knob with attached rubber buffer for preventing any damage to the muzzle. Having a rod end protector is especially beneficial in a situation when cleaning rod is deployed to forcefully remove stuck fired cartridge case from the chamber. Use ECR to remove various bore obstructions and to push oiled / dry cloth patches through the bore for a quick bore cleaning in the field. ECR will work for 5.45 / 5.56 / .22 and larger size bores. Coated rod sections and brass end protectors are made by Pro-Shot Products. Rod section color is either light beige or black, depending upon availability. |
Note from Boris, Borka Tools Owner
Emergency cleaning rod can be configured to closely
match the length of firearms barrels. This makes
emergency cleaning rod both practical and convenient for use
on a wide range of fireams, from compact handguns to rifles. Being only as long as
it is necessary makes emergency cleaning rod more mechanically rigid.
Pro-Shot is very well known for high quality products, made in the U.S.A.
As a long time target shooter, hunter
and professional engineer (P.E.), I believe that
Pro-Shot
products deserve very serious consideration.